Chain Plates and Anchor Rollers

The cap shrouds will attach to the single eye chain plate now firmly fastened to the hull.  The double wide chain plate will serve double duty to the lower shroud and the topping lift.

Should have installed chain plates before shelves.

The stainless steel backing plate is glassed to the underside of the deck.  Sampson posts sprit heel is fastened with 3/4 inch hex cap srews 4 inches long.

Gammon iron fastened

Need to find 6 inch long 1/2 inch carriage bolts to fasten thru rub rail and hull.

Boomkin stays

Port side chain plates 

Stem mounted rollers

Starboard side chain plates

Need to bellmouth anchor line bails so not to chafe rode



Seen from astern

Deck Chain plates for running backstays  

Again but closer



Wide one aft for topping lift and lower 5/16 inch shrouds and forward  for 1/4 inch cap shrouds